List of Bash online-tutorials

Here's a list with some (by far not all of course) Bash tutorials found on the Internet.

The primary purpose of that list is to lead beginners to good tutorials and not to the wrong ones. However, the secondary purpose is to provide information to increase quality of the linked tutorials.

My expirience shows that nobody is interested when you "just send a mail to the author", even if he links a big "contact me" in his article(s). This is another try of influencing the Bash world.


This is a test for the data plugin. For now, please use the next section.


Note that these recommendations are my personal opinion. Please contact me

  • if you have reviews or new sites
  • if you're not okay with a recommendation
  • if you're the author of a mentioned site (remove link, copyright, discussion, …)
  • etc…

The recommendation-indicator "REC" used below is a number between 1 and 10 visualized as a bar:

  • 0% Not recommended to read, at best, don't click the link.
  • 50% Use it with care!
  • 100% The perfect godlike tutorial (I doubt I'll ever find it)
Name (Links to review below)j Weblink    REC
Bash guide on Greg's wiki click 90% This guide teaches modern stuff and good practises. I recommend to learn from it. It was written by the guys in #bashIRC channel on Freenode (mainly lhunath), because there are so many bad tutorials out there.
Steve Parker's shell scripting guide click 90% Very good (not only Bash) shell scripting guide. Teaches good practices, gives background information.
Bash Guide for Beginners (review) click 80% Good introduction that really requires no previous knowledge, also covers the most important unix utilities
Advanced Bash Scripting Guide (ABS) (review) click 50% Has a lot of information that is hard to find, but is outdated and often unsafe. To be avoided until you can filter out the good stuff.
IBM developerWorks "Bash by example" click(1)
80% Doesn't teach outdated stuff, doesn't tell you wrong things. A good start, though not that detailed.
Deadman's click(1)
70% Focus isn't scripting per se. Focus is interactive use and increasing the productivity on the prompt. Teaches some nice features.
Bash Shell Programming in Linux (P. Lutus) click 70% Good start. Though there are small bugs.
BASH Help at (review) click 50% Shows you some nice stuff and links to other ressources. Not a tutorial to learn Bash, though.
Bash Programming Introduction HowTo (TLDP) (review) click 10% Absolute crap. Many syntax errors alone.
Quick guide (review) click 50% Usable as a start. Doesn't teach wrong stuff, shows you good practices. Writing shell scripts. (review) incomplete, thus ranking isn't complete click 50% Practise oriented, some mistakes/flaws, but sadly it stops in the middle
Linux Shell Scripting Tutorial v2.0 (review) click 40% currently reviewing (the tutorial is also under development) Bash Scripting Tutorial (review) click 0% Teaches many outdated, unstable, undetailed stuff. You won't learn scripting from there.
Beginner Linux Tutorial click 60% A comprehensive introduction to the Linux Command Line including ample examples to make learning easy.
Beginner Bash Scripting Tutorial click 60% A beginners guide to Bash scripting under Linux.

Detailed reviews Bash Scripting Tutorial

Article link:
Discussion link: UPDATE: Discussion page is gone.

Though the basic idea is nice, using flash terminal sessions and screenshots, there are many bugs or bad constructs.

Some stuff I didn't like there:

  • uses external, unreliable command which instead of builtin type -p to determinate the location of a program
  • uses function SOMENAME keyword instead of the common POSIX-compatible variant SOMENAME() to define a function
  • uses backticks instead of $( … ) for command substitution
  • abuses an additional array to store positional parameters, disregarding that $@ already is array-like
  • uses echo -e and the historical control character \c instead of modern The printf command
  • uses for a in `seq 1 10` instead of a C-like counter loop for ((a=1; a <= 10; a++))
  • the if/else stuff looks as if the test (or [ …]) command is the only thing Bash can execute and check
  • a for loop example that will explode on word-splitting
  • arithmetic tests (the while/until loop examples) using the historical "old way" with test, not modern arithmetic components
  • useless quoting of one-word strings (not that it hurts per se, but it shows that the author has no clue why to use quotes)
  • a weird construct I don't even understand (example for stdout/err redirection): grep -r hda6 * . 1>&2 stderr.txt
  • … some other things that are less important

twkm commented some things on their, I linked this article there. UPDATE: Discussion page is gone.

Overall, if the author doesn't change the article, it's unusable from my point of view. At least unusable to teach sane Bash scripting.

UPDATE: Discussion is available directly below the article. I linked this page, but waiting for moderator approval.

Quick Guide

Article link:
Discussion Link: not available

This article is usable as basic introduction into the Bash world. It doesn't teach you wrong things, and it uses correct syntax and explanations nearly everywhere. However, it's not usable as complete learning tutorial - but that is not the goal.

One point (I have to critizize something ;-) ):

  • the article says that there are no C-styled for-loops in Bash, this is wrong (maybe the article is for a very old (pre 2.05b) Bash version)

Bash Programming Introduction HowTo

Article link:
Discussion link: not available; EMail: mikkey (AT)

A few points:

  • uses function SOMENAME instead of more common and most portable SOMENAME() to define functions
  • wrong description of the if clause (says "the base […] is if [expression];", which is wrong)
  • a for-loop example will explode due to word splitting (for i in $( ls ) - evil!)
  • the mentioned C-like for-loop is not the real C-like for-loop, it just calls seq(1)+
  • Many syntax errors: The examples don't even go through the parser

I like the style this article is written in. If the points are fixed, it could be a really usable starting point for newbies. But at the moment it's unusable

BASH Help at

Article link:
Discussion link: not available; EMail: scott (AT)

The article is usable to step into the shell world. It's not a tutorial per se, it will tell you some nice CLI-specific things like readline or completion.

Only one point:

  • confusing description of the dotfiles

Advanced Bash Scripting guide (ABS)

Article link:
Discussion link: not available; EMail: thegrendel (AT)

The only big problem I see with the ABS is, that the name doesn't match the reality. It doesn't teach advanced techniques. That doesn't mean the guide isn't good! It's one of the biggest, most complete and interesting Bash guides I've seen.

I don't want to write every point here that disturbs me. In general it's not that important since the mistakes or wrong assumptions it makes are minimal. Also I noticed that mistakes in example scripts vanish over the time, the author polishes his work. Thanks Mr. Cooper.

The ABS is definitely worth to read to step deeper into the Bash and commandline world of Linux (since many Linux-specific examples are there, they're unusable for Unices).

Bash Guide for Beginners

Article link:
Discussion link: not available

Good introduction to bash and shell scripting, the guide is fairly complete and requires almost no previous knowledge other than be able to type some commands in a shell.

Some advices are a bit strange or outdated "Real Programmers - Most programmers will prefer to use the test built-in command" "Wherever possible, Bash users should try to use the syntax with angular brackets:($[ ])" but all in all a nice tutorial to get a good overview of shell programming starting from 0.

Linux Shell Scripting Tutorial v2.0

Article link:
Discussion link: use the individual MediaWiki discussion pages

Additional problem: The author rates his shell skills as "9 of 10" in his CV. After reading this tutorial personally I'd rate him 3/10

This guide got some big problems. It seems to cover a lot of material but has some pretty nasty issues, too. Examples:

  • When showing how to echo variables, it shows echo $var and echo ${var} mostly without quoting.
  • Lots of 'test' and not much '['. Not really a "problem" - more a style thing. But…
  • test and [ and great, but what happened to \[\[? And test == is not used to check two strings are equal. You want =.
  • How to deal with case insensitive matching mentions converting to lowercase with tr and doing a pattern like [tT][aA][rR]. I propose a third solution: shopt -o nomasematch
  • The for loop examples reads like a how-not-to. for i in <don't do this>: < $(ls /tmp/*)>, <1 2 3 4 5>, <$files>, <$*>. Don't parse ls. Use {1..5}. Use an array for a list of files. Use quotes (and $@).
  • The infinite-while-loop example has him reimplementing the bash select builtin. Not bad for an exercise, but it ought to acknowledge that bash does it better.
  • the description for compound commands is wrong: It shows 3 compound commands (grouping with and without subshell) where two of the examples are the same and the reason given for using ( ) applies equally to { }
  • the function definition focusses on the "function" keyword, which is the worse way
  • The initial example page for pipes seems like a good list of examples of parsing things-you-do-NOT-want-to-parse
  • the page explaining the special parameters misses $@, which is a very important one
  • the page(s) about shell variables and environment doesn't even mention "environment" so far got better.
  • backticks are not a quoting mechanism, they are a substitution mechanism. but that doesn't matter since he doesn't mention all quoting mechanisms anyways got better, but the quoting page still is misleading
  • another hint that he doesn't know what he's talking about: It's said that command substitution is allowed inside backquotes (where backquotes are a quoting mechanism!) - backquotes are command substitution!
  • etc. etc. etc. (nearly endless list, sadly)


Beside all the bashing (sorry!) above: I think the problem is the following, the author did alot using the shell, and he knows much things. Admitted. But he doesn't know and/or understand the underlying concepts of most of the stuff. This - in my personal opinion - disqualifies him as the author of a guide/tutorial for shell scripting.


The tutorial is under development. It improves here and there. But the code style and robustness problems still remain.

UPDATE: Over the time, alot of things are fixed by the author and new chapters are created. From time to time I'll visit again and cross-read it. Writing shell scripts.

Article link:
Discussion link: not available


  • Difference between startup files .bash_profile and .bashrc is wrong ("Though placing your aliases and shell functions in your .bash_profile will work, it is not considered good form.")
  • Reserved words (for the parser) are not disallowed as shell variable names (if the name follows the other naming rules)
  • It suggests the which command, which might be popular here and there, but should not be used for various reasons
  • It says, variables with UPPERCASE names are constants, this might be a good style, but it's not a programming feature. Real "constants" are made up from read-only variables
  • Common mistake it shares with many other tutorials: The ANSI C escapes are not recognized by (normal) quoting mechanisms, it's the echo command that interprets them! On the other hand, it misses the quoting style that makes the shell interpreting ANSI C escape sequences.
  • It suggests the function keyword to define a function, which is correct, but bad style and unportable
  • It could use getopts for positional parameters, at least as an "advanced example"
  • It uses the special parameters that represent the positional parameters ($@) unquoted, and thus unsafe or buggy
  • Slightly wrong: Not only SIGKILL can't be trapped, also the process stop signal. But that shouldn't really matter for daily shell coding
  • "Creating safe temporary files", which is about creating an unique name, should mention tools like mktemp or thelike
  • It's far from complete, it "suddenly stops". Maybe it's still under development


  • Practise oriented
  • It explains the behaviour of unquoted variable arguments to the test command in a nice and understandable way
  • It does not use expr or let for arithmetics, good


brad woods, 2012/07/24 14:49

I like your review of Bash/Linux tutorials. Been looking for something like it. About half the sites you reviewed are ones I am aware of and checked out; it is good to have a second opinion on the sites in order for me to get a better idea of which ones to rely on.

Hope you continue searching out and reviewing additional such sites. I will be checking back.

Cipher, 2012/09/22 02:49

Bash guide on Greg's wiki is top notch for a bash newbie. Thanks for this list of sites!!!

Miles, 2012/12/07 15:48

Hi, link to Greg's Bash Guide should be "". Thanks for your work.

Jan Schampera, 2012/12/16 14:29

Corrected. Thank you!

Enter your comment. Wiki syntax is allowed:
scripting/tutoriallist.txt · Last modified: 2014/06/23 10:48 by ryanc

Fatal error: Out of memory (allocated 35651584) (tried to allocate 40 bytes) in /homepages/41/d13525936/htdocs/bash-hackers-site/wiki/lib/plugins/quickstats/db/php-local-browscap.php on line 15